Constant Voltage waterproof led power supply 12v are reliable, long-lasting and can be used for a variety of applications such as Aceleds backlit ad signs, architecture lighting, decorative lighting, accent lighting, landscape lighting, and LED displays.
Specification
MODEL | SMT-012-200VW | SMT-024-200VW | |
OUTPUT | DC VOLTAGE | 12V | 24V |
RATED CURRENT | 16.67A | 8.33A | |
CURRENT RANGE | 0~16.67A | 0~8.33A | |
RATED POWER | 200W | 200W | |
RIPPLE&NOISE(max) | 150mV | 150mV | |
VOLTAGE TOLERANCE | ±0.5V | ±0.5V | |
SETUP RISE TIME | 80ms/110VAC, 220VAC | ||
HOLD UP TIME(Typ.) | 60ms/110VAC, 220VAC | ||
INPUT | VOLTAGE RANGE | 90~265VAC | |
FREQUENCY RANGE | 50~60Hz | ||
POWER FACTOR(Typ.) | >0.95@110VAC ; >0.98@220VAC | ||
EFFICIENCY(Typ.) | ﹥91% | ||
AC CURRENT(Typ.) | 2.10A@110VAC; 1.01A@220VAC | ||
INRUSH CURRENT (Typ.) | COLD START 50A/110VAC, 220VAC | ||
PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |
Overload | overload protected@145-160% above peak rating | ||
Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||
ENVIRONMENT | WORKING TEMP. | -30~+55℃ (Refer to output load derating curve) | |
WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof) | ||
STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||
SAFETY&EMC | SAFETY STANDARDS | CE ETL Mark(EMC,LVD),IP67 | |
WITHSTAND VOLTAGE | I/P-O/P:3.0KVAC IP-GND:3.0KVAC | ||
EMC Test Standards | EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 | ||
EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 | |||
NOTE | 1.All parameters NOT specially mentoned are measured at 110VAC,220VAC input,rated load and 25℃ of ambient temperature. | ||
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12 | |||
[1mCourant continu
alimentation led étanche 12vsont fiables, durables et peuvent être utilisés pour une variété d'applications telles que les panneaux publicitaires rétroéclairés Aceleds, l'éclairage architectural, l'éclairage décoratif, l'éclairage d'accentuation, l'éclairage paysager et les écrans LED.spécificationMAQUETTE.
SMT-012-200VW
SMT-024-200VWPRODUCTION TENSION CONTINUE 12V 24V COURANT NOMINAL 16.67A