NotreAdaptateur d'extension USB(DT-5015) vous permet de connecter votre périphérique USB à votre ordinateur à une distance allant jusqu'à 60 mètres à l'aide d'un câble de raccordement Cat5/Cat5e/Cat6 (non inclus).
Compatible avec les normes recommandées de RS-232C, RS-422 et RS-485, le convertisseur d'interface d'isolation photoélectrique UT-208 peut convertir le signal RS-232 asymétrique en signal RS-422 ou RS-485 à différence d'équilibre.
Emerson DeltaV KJ4001X1-CC1 Bornier 4 fils100% nouveau.Garantie 365 jours.
Foxboro FBM242 Channel Source externe isolée DOavec une garantie d'un anemballage neuf et original dans un sac antistatique scellé
La carte composite double fréquence signifie qu'il y a deux puces différentes dans une seule carte, et cette double carte est utilisée pour les objectifs différents de chaque puce. La combinaison la plus double puce comprend une carte IC Conact et une carte magnétique ou une carte sans contact, telle que la carte LF+HF/UHF, la carte UH+UHF, etc. La conception gratuite et les échantillons similaires/vierges sont gratuits !
Une variété depilote de LED dimmablesont disponibles pour convenirL'ÉTOILE DE LA FLAMMEBesoin d'éclairage LED.Choisissez entre intérieur et extérieur, gradable ou 12 volts etPilotes LED 24 voltsdans des marques populaires telles que Smarts.
Barre lumineuse de plafond de 4 pieds de Morstara été continuellement mis à jour et itéré pour améliorer la beauté artistique et ses propres caractéristiques. En utilisant des méthodes de matières premières plus puissantes, une meilleure technologie, se démarquer des anciennes armoires traditionnelles et continuer à développer des avantages dans le domaine de l'éclairage.
CaractéristiquesTension d'alimentation : 1,8 V/2,5 V/2,8 V/3.OV/3,3 V/5,0 V. Fonction 3 étatsSortie de niveau CMOS à faible consommation de courantDémarrage rapide : 2ms max. jusqu'à la sortie de fréquence après alimentation [Standard] Tolérance de fréquence : ±35x 10-6 et moins (-40~+85°C, inclut la tolérance de fréquence à température ambianteTolérance de fréquence à température ambiante : ±11x10-6 et moins (précision ±30 sec/mois)Conforme AEC-Q 100ApplicationsModule temporisateur, Appareils de mesure industrielsProduit de consommation, source d'horloge pour appareil multimédia automobile RTC
La carte IC de contact d'impression à jet d'encre peut être imprimée des deux côtés pour les imprimantes à jet d'encre, l'épaisseur est de 0,86 mm et la taille est de 85,5 x 54 mm, elle peut être compatible avec le plateau utilisé avec l'imprimante Epson L800 ou d'autres imprimantes Epson utilisant un plateau similaire, l'encre epson d'origine ou L'encre de marque VMS peut être utilisée pour imprimer des cartes à puce. Garantie 1 an pour les cartes à puce IC.
La carte à puce FM11RF08 est une carte sans contact à très haute sécurité avec un circuit de cryptage et de communication entièrement compatible avec la puce MF 1K S50 d'origine. Par rapport à la puce MF S50, non seulement les performances sont les mêmes, mais le prix est très bon marché.
Prise murale en porcelaine de type français montée en surface Colshine 16A 250A, avec protection pour enfants à l'intérieur. Le corps en porcelaine peut être de différentes couleurs en option, comme le noir, le blanc, le marron, le rouge, le vert, etc.Ces articles sont maintenant populaires en Europe.
CaractéristiquesRésonateur cristal diapason CMS ultra miniatureUn emballage en céramique avec couvercle en métal offrant une haute précision et fiabilité.Couvercle en métal connecté à la borne GND pour réduire les EMIConvient aux communications mobiles et aux appareils grand public.ApplicationsCommunications mobiles et appareils grand public, etc.Carte à puce et appareils portables
RétionLa caméra de documents USB est compatible avec une variété de plates-formes en ligne d'apprentissage à distance et de bureau à distance. Caméra de documents 4k Avecplage de tournage maximale A2 et distance de tournage minimale de 8 cm, il peut afficher le contenu sous plusieurs angles.
Interface de données transitoires standard Bently Nevada 3500/22M
Le porte-clés de contrôle d'accès RFID époxy combine la technologie RFID avec un joli personnage de dessin animé ou des boîtiers de porte-clés personnalisés et pratiques de toute forme. Ils peuvent facilement être accrochés au porte-clés pour un transport facile. Il y a un autocollant époxy ajouté sur l'apparence, qui est très beau.
Cet article est une lampe d'armoire électrique de 10 W, nous pouvons créer différentes couleurs, le rouge, le vert, le bleu et le blanc sont disponibles.
SMT-012-080VDH estAlimentation du pilote led ULlyPilote de led dimmable 12Vdc 80W 0-10V qui sont une boîte de jonction et un pilote intégrés pour le marché nord-américain.Plus facile à installer et à stocker que l'alimentation LED ES 80 W.