Bracelet RFID étanche en papier synthétique jetable ultraléger EV1 isFabriqué en papier synthétique anti-déchirure et incrustation rfid. Il aura une surface plus lisse que le bracelet tyvek rfid et plus durable dans un environnement difficile. Impression personnalisée, numéro de série, code à barres, différentes puces rfid sont disponibles. La structure assemblée de fermeture jetable et la puce ev1 ultra-légère compétitive seront largement utilisées pour la billetterie des parcs d'attractions, l'accès au contrôle des portes, le paiement sans numéraire, les réseaux sociaux, etc. Différents types de formes et de tailles sont facultatifs.
Le filtre harmonique actif est connecté en parallèle avec des charges non linéaires et utilise un ensemble de TC pour détecter le courant de charge. Il calcule chaque courant harmonique d'ordre par des algorithmes FFT dans ses puces DSP, puis génère un courant de compensation avec la même amplitude mais des angles de phase opposés au courant harmonique détecté, ce qui annule les harmoniques de charge d'origine. Élimine non seulement le courant harmonique de la charge côté, mais il atténue également la tension harmonique causée par les courants harmoniques. Le système AHF peut également améliorer le facteur de puissance (PF) et corriger les déséquilibres de charge dans le système d'alimentation.
Haute qualité, bon prixCourriel : sales3@askplc.comWhatsapp : 86-18150117685
Module 80ch/ 96ch 50GHZ DWDM AAWG, faible perte d'insertion, isolation élevée, faible PDL Large longueur d'onde de fonctionnement : ITU en bande C (C17/H17~ C61/H61) Température de fonctionnement étendue : -20 à 70 °C
Meihe depuis 2000 se spécialise dans la réalisation, le développement et la fabrication de cartes à puce. Équipé de lignes de production avancées, d'une équipe de R&D professionnelle et d'un système de contrôle de qualité strict, Meihe conserve une bonne réputation en matière d'excellente qualité et de prix compétitifs. Nous insistons toujours sur « l'honnêteté d'abord, la concentration professionnelle, à la recherche de l'excellence et du service pour toujours », et nous nous consacrons à innovation technologique et développement de produits.
Système d'exposition de masquage UVfor Wafer Samples est un système de table très compact, parfaitement monochromatique à 365 nm, contact dur et doux jusqu'à 4 pouces de wafer.
Capacité : onduleur 10-400KVACaractéristiques : tour, entrée triphasée, sortie triphasée, sortie PF u003d 0,8 (0,9) UPS avec transformateur d'isolation de sortie, 6 unités parallèles maximum, sûres et fiables, gestion intelligenteBatterie : externeLa couleur noireDescription : HQ 33 SERIS est un onduleur basse fréquence triphasé de 10 KVA à 400 KVA.
Le thermostat numérique sans fil Okaylight est destiné au contrôle automatique des appareils de chauffage électriques ou des appareils de refroidissement et se compose de 2 composants : une télécommande avec capteur de température intégré et une prise de courant.Il allumera/éteindra automatiquement les appareils de chauffage ou les appareils de refroidissement grâce à votre température cible prédéfinie.Maintient une température ambiante stable et offre confort et économie d'énergie.
Numéro de pièce : 3BSC610065R1Désignation du type : SD832Description du catalogue : Dispositif d'alimentation SD832, conforme G2Poids net : 0,56 kgNeuf et d'origine dans un sac antistatique avec boîte intérieure scellée individuelle.
Lumière de piscine PAR56 18 W, ABS et PC pour le matériel, qualité IP68, utilisant une source LED SMD2835 de haute qualité 216 pièces, avec contrôle DMX/télécommande RF/contrôle externe RVB.
Capacité : onduleur 10-30KVACaractéristiques : tour, entrée triphasée, sortie monophasée Sortie PF u003d 0,8 UPS avec transformateur d'isolement intégré, technologie de contrôle numérique Dual DSP, sûre et fiable, protection complète, gestion intelligente.Batterie : interneLa couleur noireDescription : HQ 31 SERIES est un onduleur basse fréquence triphasé 10KVA-30KVA
Processeur d'unité centrale GE IC695CPE310 RX3i CPE310
Le module émetteur-récepteur 1000BASE-EZX SFP 1550 nm 100 km DOM LC SMF est conçu pour être utilisé dans les interfaces client Ethernet 100GBASE et 4x28G OTN avec un débit allant jusqu'à 100 km sur fibre monomode (SMF) en utilisant une longueur d'onde de 1550 nm via des connecteurs LC duplex. Adoptant une conception séparée BOX + FPC + PCBA, il présente une grande fiabilité, une grande étanchéité à l'air et des performances de dissipation thermique. Cet émetteur-récepteur est conforme aux normes IEEE 802.3ba 100GBASE-LR4 et OTU4 4I1-9D1F. Des fonctions de diagnostic numérique sont également disponibles via l'interface I2C, comme spécifié par le QSFP28 MSA, pour permettre l'accès aux paramètres de fonctionnement en temps réel. Grâce à ces fonctionnalités, cet émetteur-récepteur facile à installer et remplaçable à chaud peut être utilisé dans diverses applications, telles que l'Ethernet 100G, l'OTN 112G OTU4, les télécommunications, les applications de fournisseurs de services et le réseau sans fil 5G.
L'étiquette de bibliothèque RFID stockera des identifiants uniques et d'autres informations mises à jour, qui peuvent être utilisées pour la recherche de livres et la lutte contre le vol. L'étiquette est une combinaison de papier et d'objets autocollants.
OklumièreLe thermostat numérique sans fil est destiné au contrôle automatique des appareils de chauffage électriques ou des appareils de refroidissement et se compose de 2 composants : une télécommande avec capteur de température intégré et une prise de courant.Il allumera/éteindra automatiquement les appareils de chauffage ou les appareils de refroidissement grâce à votre température cible prédéfinie.Maintient une température ambiante stable et offre confort et économie d'énergie.
La carte laser arc-en-ciel en PVC utilise un matériau PVC spécial pour sa fabrication, elle prend en charge l'impression offset CMJN ou la sérigraphie ou l'impression numérique comme les mêmes cartes PVC normales que d'habitude. Cependant, la seule différence avec le PVC normal est que vous pouvez voir différentes couleurs à partir de différentes vues.
MITSUBISHI Electric AJ65SBTB2-16T1 CC Link I/O Output Module PLC Automation
> Type de carte : carte EM > Boîtier métallique, anti-vandalisme > Capacité : 200empreintes digitales et 10 000 cartes > Deux accès : carte, empreinte digitale > Contrôleur d'accès et lecteur d'empreintes digitales, entrée/sortie WG26