Sales

CA à CCAlimentation LED à tension constante 24V 90W

Les détails du produit

Product name:AC to DC24V 90W Constant voltage LED power supply

SPECIFICAION
MODEL		SMT-012-090VW	SMT-024-090VW
OUTPUT	DC VOLTAGE	12V	24V
	RATED CURRENT	7.5A	3.75A
	CURRENT RANGE	0~7.5A	0~3.75A
	RATED POWER	90W	90W
	RIPPLE&NOISE(max)	150mV	140mV
	VOLTAGE TOLERANCE	±0.5V	±0.5V
	SETUP RISE TIME	80ms/110VAC
	HOLD UP TIME(Typ.)	60ms/110VAC
INPUT	VOLTAGE RANGE	100~265VAC
	FREQUENCY RANGE	50~60Hz
	POWER FACTOR(Typ.)
	EFFICIENCY(Typ.)	﹥83%
	AC CURRENT(Typ.)	0.92A/110VAC, 0.86A/220VAC
	INRUSH CURRENT (Typ.)	COLD START 50A/110VAC, 220VAC
PROTECTION	Short circuit	Protection type:recovers automatically after condition is removed
	Overload	overload protected@145-160% above peak rating
	Over temperature	Protection type:Shut down o/p voltage,re-power on to removed
ENVIRONMENT	WORKING TEMP.	-30~+50℃ (Refer to output load derating curve)
	WORKING HUMIDITY	20~99% RH non-condensing(Waterproof IP67)
	STORAGE TEMP.,HUMIDITY	-40~+80℃,10~99%RH
SAFETY&EMC	SAFETY STANDARDS	CE UL Mark(LVD)
	WITHSTAND VOLTAGE	I/P-O/P:1.5KVAC IP-GND:1.5KVAC
	EMC Test Standards	EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006
		EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006
NOTE	1.All parameters NOT specially mentoned are measured at 110VAC,220VAC input,rated load and 25℃ of ambient temperature.
	2.Ripple&noise are measured at 20MHz of bandwidth by using a 12

[1mNom du produit : AC à DC